Which refractory material is used for the construction of complex parts of kiln lining

Release time:

2022/12/27

Share:


The construction of complex parts of high-temperature kiln equipment can be selected according to the actual situation. If it is impossible to support the mold, fire-resistant coating materials, wear-resistant plastic materials, etc. can be used. If it is impossible to vibrate, wear-resistant self-flow castables can be used.

The construction of complex parts of high-temperature kiln equipment can be selected according to the actual situation. If it is impossible to support the mold, fire-resistant coating materials, wear-resistant plastic materials, etc. can be used. If it is impossible to vibrate, wear-resistant self-flow castables can be used.
Compared with other amorphous refractories, the main differences of coating are particle ratio, micro addition, deletion and water addition. The amount of water added to the refractory coating can change its construction method after changing. If the spraying construction increases the water volume, the tamping construction will be reduced.
The nature of refractory coating depends on the proportion of refractory aggregate and powder and the type of adhesive. The coating has certain plasticity, slurry, manual coating or mechanical spraying charm, and generally requires high strength, good resistance to melt or gas corrosion, good coating adhesion, good thermal shock stability, good chemical stability, no cracking, no peeling, etc.
Self-flowing refractory pouring materials have attracted more and more attention due to their excellent construction performance and physical and chemical properties. The artesian series products are applicable to the chaos of the construction site and are widely used in the cement industry, metallurgical industry and non-ferrous metallurgical industry, such as the tundish intermediate layer, the bottom of the blast furnace, the secondary movement CAS-OB movable cover lining, the induction insulation layer of the cast iron tank, the heating furnace, the full-heat furnace, the rotary kiln cooler, the burner, the ammonia gasification furnace, the carbon black reaction furnace, the civil waste incineration furnace lining, etc. It can also be used to repair kiln lining data and prolong service life.

Other news

Material composition and selection of high-temperature kiln furniture

Release time:

2022/12/27

Material composition and selection of high-temperature kiln furniture

High-temperature kiln furniture is mainly made of corundum mullite, with 80% alumina content and about 20% silicon oxide content, density of 2700-3000 kg/m3, pure white color, no pollution caused by any impurities, imported raw materials, long-term service temperature up to 1700+degrees, all inspected according to Japanese standards

Five application scenarios of silicon nitride ceramics

Release time:

2022/12/27

Five application scenarios of silicon nitride ceramics

Five major applications of silicon nitride ceramics